Live briefing
Everything about Data Terminal Ready
Control signal
Data Terminal Ready (DTR) is a control signal in RS-232 serial communications, transmitted from data terminal equipment (DTE), such as a computer, to data communications equipment (DCE), for example a modem, to indicate that the terminal is ready for communications and the modem may initiate a communications channel. Wikipedia →
🧠Start here: a 6-step reading path
- Read the overview: Data Terminal ReadyA 5-minute orientation
- Pick up a classic book: Operations ManagementThe most-reprinted book on the subject
- Go sideways: RS-232A closely related topic
- Go sideways: Null modemA closely related topic
đź“– Definitions
No dictionary entry for this exact phrase.
🗂️ The subject at a glance
🏆 Landmark papers (most cited)
- No matching papers found.
đź“š Books worth reading
Operations ManagementRoberta S. Russell, Bernard Taylor · 1998
Cartesian meditationsEdmund Husserl, Dorion Cairns · 1960
The Conspirators HierarchyJohn Coleman · 1992
OS/2Dick Conklin · 1988- 📕Data Terminal ReadyGerardus Blokdyk · 2018
- 📕Data Terminal ReadyGerardus Blokdyk · 2018
A field guide to genetic programmingRiccardo Poli · 2008
Awareness TechniquesWilliam Swygard · 1970
Ranked by number of editions on Open Library, a rough measure of how lasting a book is.
đź”— Related topics
- RS-232 In telecommunications, RS-232 or Recommended Standard 232 is a standard introduced in 1960 for serial communication transmission of data. It formally defines…
- Null modem Null modem is a communication method to directly connect two DTEs (computer, terminal, printer, etc.) using an RS-232 serial cable. The name stems from…
- Serial port A serial port is a serial communication interface through which information transfers in or out sequentially one bit at a time. This is in contrast to…
- Data Carrier Detect Data Carrier Detect (DCD) or Carrier Detect (CD) is a control signal present inside an RS-232 serial communications cable that goes between a computer…
- Flow control (data) In data communications, flow control is the process of managing the rate of data transmission between two nodes to prevent a fast sender from overwhelming…
- GeoPort GeoPort is a serial data system used on some models of the Apple Macintosh that could be externally clocked to run at a 2 megabit per second data rate…
- Software flow control Software flow control is a method of flow control used in computer data links, especially RS-232 serial. It uses special codes, transmitted in-band, over…
- Command mode and data mode Command mode and data mode are two modes in which a computer modem may operate. These modes are defined in the Hayes command set, which is the de facto…